Pasin Pin System

The Pasin-Pin System was developed to provide maximum flexibility in orthodontic therapy.

The coupling of implant and anchoring device is not system-dependent, so that orthodontists have maximum freedom of treatment. All forms of round and square wires up to a dimension of 1.15 mm (0.046 inches) can be securely and stably fixed by a screwable connection. Pasin-Pin implants are made of Grade 5 titanium (Ti6AL4V) and feature self-drilling and self-tapping threads. The material is characterised by high biocompa tibility and high tensile strength. Its mechanical properties are excellent, especially when it is used for ortho- dontic implants with a small diameter.

Functional principle

1
2
1

2 x Pasin-Pin

2

Paramedian placement

1
2
3
4
1

Round wire 1.1 mm

2

Distalization system

3

Bayonet Connector

4

Mesialization system

1
2
1

Round wire 1.1 mm inserted in Pasin-Pin Slot

2

Bayonet Connector inserted in palatal sheath

1
2
1

Screwed Pasin-Pin Fix Cap

2

Rotationally stable and non-tiliting wire fixation

Distalization and mesialization in the upper jaw

1
2
3
1

Mesialization system

2

Individualized 1.1 mm round wire

3

Distalization system

Detail Mesialization

1
2
3
4
5
1

Bayonet Connector
inside palatal sheath

2

Sliding and
firmly screwable 
Activation Lock

3

Wire ligature

4

Jet Hook

5

Closed coil spring

Detail Distalization

1
2
3
4
1

Bayonet Connector
inside palatal scheath

2

Sliding and
firmly screwable
Activation Lock

3

1.1 mm round wire

4

Compression spring 250 cN

Distalization and mesialization in the lower jaw

Lower jaw appliance with bondable connector

Distalization system with bondable connector

Mesiallization system with bondable connector

Distalization with TPA in the upper jaw

Components used: Jet Hook, Activation Lock, Compression spring Individualized standard TPA, Individualized 1.1 mm round wire

Application examples

M4 appliance without plate with 1.1 mm round wire

Implant supported RME

T-plate with adjustable TMA spring for impacted canine teeth

Implant supported RME

Video

Pasin-Pin screw design

Additional features and benefits of the Pasin-Pin

The Pasin-Pin is available in diferent diameters and lengths, for the upper and lower jaws.

DurchmesserLänge
8 mm10 mm12 mm14 mm
Oberkiefer2,3 mm
2,0 mm
Unterkiefer1,6 mm

The length specification of the Pasin-Pin combines the lengths of thread and transgingival collar. The slot in the head of the Pasin-Pin is 1.2 mm (0.047 inches) wide.

Coupling elements (square & round wires) are fixed in place by the Pasin-Pin Fix Cap, a screwable connector.

When using non-slot-filling wires, a light-curing com- posite can be used to additionally stabilise the wire.

Rotational stability:

When disassembling the orthodontic appliance from the Pasin-Pin, or when unscrewing the Pasin-Pin Fix Cap, stabilisation of the appliance will make the implant rotationally stable, so that unintentional unscrewing of the implant is prevented.

The small distance of 0.4 mm between the tr-ans gingival collar and the anchoring wire ensures low leverage and shearing forces and thus prevents early implant loss.

The Pasin-Pin is supplied sterile and guarantees an absolutely clean surface. The surface is free from organic and inorganic particles and toxins to prevent premature implant loss.