Pasin Pin

Product

Order

Pasin-Pin Ø 1,6 mm

Pasin-Pin 1,6 x 8 mm

Pasin-Pin 1,6 x 10 mm

Pasin-Pin Ø 2 mm

Pasin-Pin 2,0 x 8 mm

Pasin-Pin 2,0 x 10 mm

Pasin-Pin 2,0 x 12 mm

Pasin-Pin 2,0 x 14 mm

Pasin-Pin Ø 2,3 mm

Pasin-Pin 2,3 x 8 mm

Pasin-Pin 2,3 x 10 mm

Pasin-Pin 2,3 x 12 mm

Pasin-Pin 2,3 x 14 mm

Starter Set

 Pasin-Pin System Starter Set | Part no. PPSS

Delivered in P-Casebox.
1 x P-Screwdriver 25 mm
1 x P-Screw Holder 25 mm
1 x Screwdriver Hex 20 mm
1 x Q-Screw Handle
2 x Laboratory Analog
1 x Screwdriver FC 20 mm

Product Sets for mesialization and distalization

 Pasin-Pin System Set A | Part no. DKS10
2x Pasin Pin to choice
2 x Bayonet Connector
2 x Pasin-Pin Fix Cap
2 x NiTi-Spring 250 cN
1 x P-Plate: T-Type oder H-Type to choice
2 x Activation Lock with Screw
 Pasin-Pin System Set B | Part no. DKS15
2x Pasin Pin to choice
2 x Bayonet Connector
2 x Pasin-Pin Fix Cap
2 x NiTi-Spring 250 cN
2 x Activation Lock with Screw

Accesories

Screwdriver

ProductDescriptionPUOrder
P-Screwdriver 25 mm
The screwdriver is available in diferent lengths. This instrument helps to align the implant, or the slot, after insertion. Unlike the screw holder, the screwdriver does not exert any frictional or tensile forces during removal from the implant screw1
P-Screwdriver 35 mm
1
P-Screwdriver long
1
Screwdriver FC 20 mm
Screwdriver for the Pasin-Pin Fix Cap1
Screwdriver FC 30 mm
Screwdriver for the Pasin-Pin Fix Cap1
Screwdriver Hex 20 mm
Screwdriver for the Titanium Fixing Screw or the Activation Lock1
Screwdriver Hex 30 mm
Screwdriver for the Titanium Fixing Screw or the Activation Lock1

Screw holder

ProductDescriptionPUOrder
P-Screw Holder 25 mm
The screw holder is available in diferent lengths. This instrument ensures a safe, sterile removal from the packaging and a secure hold during implantation.1
P-Screw Holder 35 mm
1
P-Screw Holder long
1

Accesories

ProductDescriptionPUOrder
P-Plate T-Type
Prefabricated coupling element for two Pasin Pins. Connects square wire to round wire.1
P-Plate H-Type
1
Pasin-Pin Laboratory Analog
After implant insertion, a silicone impression of the jaws can be taken to obtain a negative form of the clinical situation. The Pasin-Pin laboratory analog will be positioned in the impression.2
Drill 1,0 x 15 mm
Pilot drill1
Q-Screw Handle
Screwable and sliding body for activation of the coil spring1
Activation Lock
with Screw
Screwdriver handle for all dental handpiece screwdrivers2
Titanium
Fixing Screw
Replacement screws for Activation Lock10
NiTi-Spring
250 cN
Coil spring with 250 cN2
Spring
500 cN
Coil spring with 500 cN2
Bondable
Connector Round
Prefabricated coupling element for direct bonding to the tooth, developed by Dr. Banach2
Bayonet
Connector Round
Prefabricated coupling element to palatal sheath2
Jet hook
Prefabricated coupling element for TPA or a closed coil spring10
Torque-Ratchet
Torque ratchet for implant insertion at a specific maximum torque1
P-Screw Handle
Screwdriver handle for SD 70 and SD70G screwdrivers, for manual insertion of implants1

Products for surgical guide and 3D software solution

ProductDescriptionPUOrder
P-Screw Holder
Guide 30 mm
Special Pasin-Pin Screw Holder to use in combination with a surgical guide splint1
P-Drill
Guide Sleeve
Guide Sleeve for „DR10“ Drill; to use in combination with a surgical guide splint1
P-Screw Holder
Guide Sleeve
Guide Sleeve for „SD30G“ Screw Holder; to use in combination
with a surgical guide splint
1
Scanbody Pasin-Pin
To use in combination with intraoral scanner and 3D software2

Casebox and Electric screwdriver

ProductDescriptionPUOrder
P-Casebox
Pasin-Pin System case box1
P-Sterilization-Box
Sterilisable instrument tray1
W&H Prosthodontic
Screwdriver
Electric screwdriver with adjustable torque, for easy implantation1IA-400

Typodont

ProductDescriptionPUOrder
Upper Crowding NarrowTypodont without implants and without appliance


1
Upper Crowding Regular1
Lower Crowding Regular1
Lower Straight1
Upper Straight1